Your Reliable Wire Mesh Partitions Supplier in China
Wire mesh partitions are modular welded‑steel isolation systems. Made up of mesh panels, heavy‑gauge square‑tube posts, matching doors, and security locks, they provide safe zone division with unobstructed light and ventilation.
On Anping’s side, you get a wire mesh system that has been verified for the quality of the entire process. The raw materials are tested for strength, the solder joint stability is checked piece by piece during welding, the surface coating is tested for wear resistance and anti-corrosion, the load-bearing lock verification is performed, and we conduct a complete pre-assembly test to resolve dimension and installation issues in advance. At the same time, the product complies with EN ISO 14120 standards; CE and TÜV reports are available, and a complete quality inspection form helps you pass factory inspection and customs clearance more smoothly. Reduce your installation rework costs and get your plan off the ground quickly.
Robust Mesh for Workplace Safety
Anping wire mesh partitions use a fully automatic resistance welding process to process the entire mesh. High-temperature fusion welding is performed at the steel wire intersection points, which can greatly avoid quality problems such as false welding and desoldering. The frame is made of thickened square tubes and mesh welded together. If your workshop is in complicated working conditions, we can add a V-shaped bending reinforcement structure, which improves the overall load-bearing and impact resistance of the integral mesh. Even under frequent scratches and accidental impacts in daily operations. The mesh panels remain resistant to deformation; the grid itself is transparent; the space is open and not suppressed. While doing a good job of dividing the area, you can always see the internal equipment and goods without removing the partitions.
Modular Design for Fast Reconfiguration
The entire set of partitions from Anping is a modular standard component. We make special solderless clips by ourselves, and we do not need to solder or punch holes for on-site assembly, so installation is easy and fast. The modular design also adds flexibility to your project. The mesh, columns, and door bodies are all independent parts. You can assemble different-sized patterns according to the actual situation of the project site, and both large and small sites can be adapted. We will complete these accessories such as swing doors, sliding doors, and security locks for you, saving you the trouble of purchasing more and shortening your project construction period. If the layout of production lines and warehouses is changed at a later stage, they can also be directly disassembled, reorganized, and continued to be used, saving your renovation costs.
Dual‑Layer Protection for Lower Costs
After the mesh and columns are all formed, we will do a full double-layer anti-corrosion treatment. First, the entire bottom is hot-dip galvanized, so the zinc layer penetrates all corners of the steel, thereby isolating water vapor and preventing rust inside the steel. Then the outer layer is electrostatically sprayed with Akzo Nobel polyester powder and cured at high temperature to form a plastic protective layer with a smooth surface, wear resistance, and anti-aging. Oil and dust on the smooth surface can easily be wiped clean. This double-layer anti-corrosion process prevents peeling and fading during long-term outdoor use or use in oil-stained workshops.
At the same time, we also offer custom RAL industrial colors. Built for durability, our products hold up reliably in tough conditions. You will rarely need renovation or replacement, cutting your maintenance and re‑purchase costs. With less maintenance work, you get less production‑line downtime, reduced operational losses, and better production profits.
Keep Your Maintenance Simple
In later use and maintenance, Anping will try to help you reduce costs and trouble. The entire steel mesh partition comes with a warranty. Within the warranty period, if standard accessories like buckles, hinges, or door locks are damaged, we can replace them for free. If you need to adjust the production line, expand the warehouse, or move the facility later on, we will provide disassembly guidance to make it easy to continue using after dismantling. If you need partial upgrades, just replace the corresponding accessories without repurchasing the entire set. We have dedicated personnel to handle after-sales service, so issues can be responded to quickly, making your daily maintenance easier.
Wire Mesh Partitions Specification
| Item | Specification |
| Mesh Panel Material | Q235 mild carbon steel; 304/316 stainless steel optional |
| Wire Diameter | Standard: 3.8- 4.0 mm; Heavy‑duty: 4.5- 5.0 mm |
| Mesh Opening | Standard 50×50mm; Optional 50×100mm, 30×30mm |
| Welding Process | Fully‑automatic resistance welding, joint shear strength ≥85% of base material |
| Reinforcement Option | V‑bend stiffener for improved anti‑deformation performance |
| Square Tube Frame | Standard: 40×40×1.5mm; Heavy‑duty: 50×50×2.0mm |
| Panel Dimension | Width 800‑1500mm, Height 1200‑3000mm (common: 2000‑2500mm) |
| Assembly Method | Solder‑free clip‑on modular assembly, no on‑site welding or drilling |
| Base Plate & Fastener | 180×70mm base plate with M10 anchor bolts |
| Bottom Clearance | 80- 120 mm, customizable |
| Edge Treatment | Deburred cut edges for operator safety |
| Double‑Layer Anti‑Corrosion ‑Base Layer ‑Top Layer | Hot‑dip galvanized, zinc coating ≥275g/m² (ISO 1461) AkzoNobel polyester powder coating, 60‑90μm thickness |
| Salt‑spray Performance | > 720 h no red‑rust (ISO 9227) |
| Color | Custom RAL industrial colors available |
| Impact Resistance | 3kJ for heavy‑duty grade, withstand forklift scratches & impacts |
| Compliance Standard | EN ISO 14120 machinery guarding |
| Available Documents | CE, TÜV test reports, full inspection documents |
| Door Type | Swing door, sliding door |
| Door Hardware | Heavy‑duty steel hinges, mechanical key lock; safety interlock switch optional |
| Swing Door Max Opening Angle | 110° |
| Optional Accessories | PC anti‑glare baffle, reinforcement connectors |
| Pre‑shipment Check | Pre‑assembly inspection to avoid on‑site fitting issues |
| Service Life | 8‑12 years for normal indoor workshop; 7‑10 years for oily/humid environment |
| Warranty | 2‑year standard warranty, free replacement for standard accessories within warranty |
| Custom Support | Assembly instructions provided; production per customer CAD drawing |
| Packing | Steel pallet packing for container shipment |
| HS Code | 73089000 |
Applications of Wire Mesh Partitions
You can keep workers out of hazardous zones while viewing running equipment and complying with workshop EHS rules. Our Anping wire mesh partitions shield automation gear and robots via open‑grid physical barriers. Safety interlock switches can be added as an option.
You can use wire mesh partitions to divide the storage area from the valuable material storage area, and modular accessories can be assembled quickly. The post-adjustment layout can be disassembled and reused, helping you flexibly plan the warehouse and reduce renovation costs.
Anping wire mesh partitions create enclosed compartments for storing tools and spare parts. The robust mesh offers dependable physical protection. You can conveniently inspect and inventory stock. For future expansion, just replace or add individual components, with no need to take apart the whole unit.
Cost‑effective compared with solid walls, they divide zones while preserving light and visibility. Our partitions separate workstations from material zones, and the reinforced structure stands up to daily forklift scuffs and minor impacts.
We use a double‑layer anti‑corrosion treatment to cut down on the risk of rust and coating peeling. That said, these carbon‑steel partitions cannot stay 100% corrosion‑free in high‑humidity or coastal salt‑spray conditions.
For those tough environments, you can go with our hot‑dip galvanized carbon‑steel option (ISO 1461), or step up to 304 / 316 stainless steel for better corrosion resistance. Every batch goes through salt‑spray testing before shipment to check its anti‑rust performance.
Our standard adjustable base plates handle small unevenness on the floor. If you have big height differences on‑site, we can supply extra raised support feet to get a proper fit.
We will go over your site conditions with you once we get your order, so we can prepare everything in advance. If the floor is extremely uneven, we suggest simple floor‑levelling work; this helps keep the partitions stable and long‑lasting.
Our products can withstand normal equipment vibration in the workshop without obvious shaking. However, if it is a high-vibration working environment, it is recommended that you add additional reinforced connectors to improve the overall stability. We will proactively remind you of relevant precautions during the quotation stage.
Anping wire mesh partitions do not cut corners on pipe wall thickness. From the time the raw materials enter the factory, we start to check the wall thickness and strength of the pipes, steel wires, and columns to screen out unqualified ones. During production, we will check the solder joints one by one, reinforce the structure, and strictly enforce the pipe thickness according to the order requirements. We also make the whole set pre-assembled and check the various sizes before shipping. We will provide materials and quality inspection documents to help you avoid quality hazards and save you the cost of secondary inspection.
